Controller (PCI-N1002)

Controller (PCI-N1002)

The PCI-N1002 is a PIC bus interface card providing the Motionnet 2ring. It is widely adopted in the system automation including the motion science and digital I/O devices.
The product eliminates the complicated wiring with the one-line connecting design, and its 2ring supportive feature, more slave modules can be mounted per board.

Features

1. Distributed motion & I/O master card
2. Long-distance wiring
3. Connect I/O points up to 4,096 points
4. Connect motion axis up to 256 axes
5. RJ-45 jack for easy installation
6. Programmable transmission speed : 2.5/5/10/20Mbps
7. RS-485 with transformer isolation
8. Half duplex communication
9. Compact, half-size PCB

Specification

• General Specification
  - PCI specification : 2.2 supports 32-bit, 3.3 or 5V DC operation
  - Power consumption : 5V at 0.6A typical
  - Working temperature : 0 to 60°C
  - Storage temperature : -20 to 75°C
  - Dimension : 129 x 99mm
• Motionnet Specifications
  - Number of rings : 2
  - Number of ports : 4
  - Transmission speeds : Programmable baud-rate up to 20Mbps
  - with automatic data scan control
  - Data scan time : Less than 1msec at 64slaves (15.1usec per slave)
  - Communication : Half duplex RS-485 with transformer isolation
  - Cable : CAT5, CAT6 Ethernet cable
  - Connector : RJ45 jack
  - Surge protection : 10kV
  - Communication distance : Max 100m per Port (20Mbps at 32 slaves)
  - Slave module capacity : 2 Rings with Max 128(1ring has 64 slaves)